What Comes in a 10 × 10 Kitchen Cabinet Package?

A 10 × 10 kitchen is one of the most common reference sizes used to compare cabinet pricing. It does not mean every room that measures 10 feet by 10 feet uses the same cabinets. It is a standardized layout concept that helps customers compare a typical group of base and wall cabinets before adapting the list to a real kitchen.

What does 10 × 10 mean?

In most cabinet-package discussions, 10 × 10 refers to two cabinet runs that form an L-shaped layout. Each run is approximately 10 feet long. The exact cabinet combination depends on the corner solution, sink, appliances, drawer storage and fillers needed to make the design work.

ShopKitchens also offers straight and U-shaped package references. Browse the current kitchen cabinet packages to compare layouts.

What cabinets are typically part of the package?

A practical 10 × 10 cabinet package generally combines several cabinet types:

• base cabinets for countertop support and lower storage;
• a sink base cabinet;
• wall cabinets above the countertop;
• a corner cabinet solution where the two runs meet;
• at least one drawer-storage solution in many layouts;
• fillers or finishing components needed to complete the planned runs.

The exact SKU list matters. Two 10 × 10 kitchens can use different cabinet widths while occupying similar wall lengths.

Are countertops included?

Cabinet packages and countertops should be treated as separate scopes unless the individual package listing clearly states otherwise. Countertop square footage depends on the final cabinet layout, depth, overhangs, seams, sink cutout and any island or peninsula.

If you are planning stone surfaces, see our quartz countertop options and our guide to quartz countertop price and planning factors.

Are appliances included?

Kitchen cabinet packages are cabinet packages, not appliance packages. Your refrigerator, range, dishwasher, microwave, wall oven or cooktop still affects the cabinet design because openings and surrounding cabinets need to be sized correctly.

Before ordering, confirm the actual appliance model or at minimum the required opening width and installation requirements. This is especially important for refrigerator panels, over-fridge cabinets, microwave cabinets, oven cabinets and range-hood layouts.

What about panels, fillers and toe kicks?

These details are easy to overlook and are essential to a finished kitchen. A package may include certain standard components, while your actual room may require additional fillers, exposed end panels, refrigerator gables, toe kicks or decorative trim. Walls are rarely perfectly square, so fillers should be planned rather than assumed away.

You can browse fillers and trim, end panels and toe kicks individually.

Does the package include assembly and installation?

Do not assume it does. RTA cabinet packages are designed around cabinet products, while assembly, delivery and installation can be separate services or selections depending on the order. Check the specific package terms and review our assembly and installation page.

Can I change the cabinet list?

A standard package is most useful as a starting point. A real kitchen may need a pantry instead of a base-and-wall combination, a lazy Susan instead of another corner type, a wider drawer base, a different sink cabinet, or different uppers around a window or range hood.

If your room does not match the package exactly, build the kitchen from individual frameless cabinets or send the layout for review.

What should I measure before ordering?

1. Each wall length from corner to corner.
2. Ceiling height.
3. Window and door locations, including trim.
4. Refrigerator width and location.
5. Range or cooktop width and location.
6. Dishwasher location.
7. Sink centre or plumbing location.
8. Any bulkheads, vents, radiators or obstacles.

Use the ShopKitchens measuring guide to record the room. Then upload your measurements for a free estimate if you want the cabinet list reviewed.

Who is a 10 × 10 package best for?

It is useful for homeowners who need a clear starting budget, contractors comparing a repeatable cabinet set, landlords planning straightforward replacements and anyone who wants to understand how a complete cabinet run is assembled from individual SKUs.

The key is to treat the package as a planning shortcut, not a substitute for checking the actual room. When the measurements and appliance openings are confirmed, you can adjust the standard package into a cabinet list that fits the kitchen instead of forcing the kitchen to fit the package.